MODX Revolution

EMI Filtered Connectors

EMI Filtered Connectors

Standard and customized EMI filtered connectors for Military, Aerospace, Transportation, Commercial and Industrial applications

EMI’s unique designs provide solid ground planes around the filter components to not only provide the lowest impedance path for the filter, but also provides increased shielding throughout the connector area. The parameters you have to consider when deciding on a filtered connector are as follows:

  • Required performance
  • Available space
  • Component cost
  • Shielding availability

Applications for EMI Filtered Connectors include:

  • Missile Systems
  • Medical (MRI, CT SCAN)
  • Avionics
  • Manned and Unmanned Vehicles
  • Gaming Technology
  • IC Test Equipment
  • Transportation
  • Seismic monitoring
  • GPS Equipment

Custom configurations are available

Mil-Circular EMI Filtered Connectors

EMI Solutions' full range of Mil-Circular filtered connectors offer the convenience and flexibility of standard configurations while delivering unsurpassed EMI/EMC performance. Filtered connectors are the best means of eliminating unwanted noise from any electronic system. Using filtered connectors eliminates the EM and RF noise that will be picked up through the contacts/leads generated by any internal or external source right at the connector's interface. There are a multitude of ways to filter or shield at the board level, but none can outperform filtering at the boxes' interface.

Our filtered military circular connectors are made for the following QPL'd connectors:

  • EMI Filtered MIL-38999 Connectors
  • EMI Filtered MIL-26482 Connectors
  • EMI Filtered MIL-5015 Connectors
  • EMI Filtered Mil-83723 Connectors
  • EMI Filtered Mil-25799 Connectors
  • EMI Filtered Mil-26500 Connectors

EMI filtering maximised using custom pin by pin configurations:

  • Chip Cap (Capacitors)
  • Discoidal / Feed Thru
  • Planar Array
  • CL / LC
  • Pi Tubes

Termination options:

  • Solder Cup
  • PC Tail
  • Wired

For further information about EMI Filtered Connectors. Please contact our Sales Manager Lewis Richmond on +44 (0) 7770 833 747 or lewis@p-p-t.co.uk or General Sales +44 (0) 1376 550 525.

D-Subminiature EMI Filtered Connectors

EMI Solutions' full range of D-Sub filtered connectors offer the convenience and flexibility of standard configurations while delivering unsurpassed EMI/EMC performance. Filtered connectors are the best means of eliminating unwanted noise from any electronic system. Using filtered connectors eliminates the EM and RF noise that will be picked up through the contacts/leads generated by any internal or external source right at the connector's interface. There are a multitude of ways to filter or shield at the board level, but none can outperform filtering at the boxes' interface.

Our filtered D-Subminiature connectors are made for the following QPL'd connectors:

  • EMI Filtered MIL-24308 D-Sub Connectors

Custom filtering options include, but are not limited to:

  • Chip Caps (Capacitors)
  • Transient Voltage Suppressors
  • Planar Arrays
  • Discoidal Capacitors
  • Pi Filters

Termination options:

  • Solder Cup
  • PC Tail
  • Wired

For further information about D-Subminiature EMI Filtered Connectors. Please contact our Sales Manager Lewis Richmond on +44 (0) 7770 833 747 or lewis@p-p-t.co.uk or General Sales +44 (0) 1376 550 525.

Micro-D EMI Filtered Connectors

EMI Solutions' full range of Micro-D filtered connectors offer the convenience and flexibility of standard configurations while delivering unsurpassed EMI/EMC performance. Filtered connectors are the best means of eliminating unwanted noise from any electronic system. Using filtered connectors eliminates the EM and RF noise that will be picked up through the contacts/leads generated by any internal or external source right at the connector's interface. There are a multitude of ways to filter or shield at the board level, but none can outperform filtering at the boxes' interface.

Our filtered Micro-D connectors are made for the following QPL'd connectors:

  • EMI Filtered MIL-83513 Micro-D Connector

Custom filtering options include, but are not limited to:

  • Chip Caps (Capacitors)
  • Transient Voltage Suppressors
  • Planar Arrays

Termination options:

  • PC Tail
  • Solder Cup
  • Wired

For further information about Micro-D EMI Filtered Connectors. Please contact our Sales Manager Lewis Richmond on +44 (0) 7770 833 747 or lewis@p-p-t.co.uk or General Sales +44 (0) 1376 550 525.

Back to top