Nolato PPT
Connector Gaskets
Our range of connector gaskets includes precision diecut gaskets made from a large selection of materials, both conductive and non-conductive.
Both EMI shielding connector gaskets & environmental shielding connector gaskets are available as waveguide and connector gaskets to MIL-C-81511, MIL-C-5015, MIL-C-38999 and MIL-C-26482 plus industry standard configurations including BN, BNC, D, WG, WR, IEC, UG, AN and special profiles cut to customers specifications.
Applications
Generally connector gaskets are cut from thin reinforced materials, such as conductive filled aluminium mesh or silicone filled expanded Monel foil, to ensure that the compressive forces exerted ion the connector do not distort the gasket. However, for certain applications oriented wires in silicone or conductive silicone EMI shielding materials are selected for their specific properties.
Most gaskets can be made from all standard materials but it is important to consider the ‘land-width’ around the periphery of a connector gasket if conductive filled aluminium mesh or silicone filled expanded Monel foil are specified. In some instances, where a gasket has fixing holes on each corner, the holes are extended outwards to slots, which helps to prevent damage to the gasket during production and fitting.
EMI shielded connector gaskets are fitted in the normal manner and particular care should be taken when passing a gasket over a threaded connector body. Avoid the use of conductive adhesives as they tend to adversely affect the sealing characteristics of most types of gasket.
Contact us about this product
Can’t see what you’re looking for?
-
Specifications
The specifications and temperature ranges of each material type can be found in the relevant material sections.
-
Performance
The emi shielding performance of each material type can be found in the relevant product sections.
-
How to order
For AN connector gaskets specify the relevant part number from the table below.
For all other waveguide and connector gaskets, state the material type and drawing number, MIL reference or standard specification as applicable or contact us to discuss your requirements.
-
Part Numbers
MIL-C-5015/26482 Connector Gaskets
AN Shell Size Dimentions (mm) Part Number Suffix Part Number Prefix A B C D 8 22.23 12.7 15.09 4.5 08 MC-1 = Silicone Filled Expanded Monel Foil 0.5mm 10 25.40 15.88 18.26 4.5 10 MC-2 = Silicone Filled Expanded Monel Foil 0.75mm 12 27.79 19.05 20.65 4.5 12 MC-3 = Silicone Filled Aluminium Mesh 0.5mm< 14 30.18 22.23 23.01 4.5 14 MC-4 = Neoprene Filled Aluminium Mesh 0.5mm 16 32.54 25.40 24.61 4.5 16 MC-5 = Oriented Wires in Solid Silicone 18 34.93 28.58 27.00 5.0 18 MC-6 = Oriented Wires in Solid Fluorosilicone 20 38.10 31.75 29.36 5.0 20 MC-7 = Nickel Graphite Conductive Silicone 22 41.28 34.93 31.75 5.0 22 MC-8 = Oriented Wires in Flame Retardant Solid Silicone 24 44.45 38.10 34.93 5.5 24 MC-9 = Silver Aluminium Conductive Silicone 28 50.80 44.45 39.70 5.5 28 Other materials available on request 32 57.15 50.80 44.45 6.0 32 Examples 36 63.50 55.58 49.23 6.0 36 MC-312 = Shell size 12 in 0.5mm Silicone Filled Aluminium Mesh 40 69.85 61.93 55.58 6.0 40 MC-210 = Shell size 10 in 0.75mm Silicone Filled Expanded Monel Foil 44 76.20 70.64 60.33 6.0 44 48 82.55 76.99 66.68 6.0 48 MIL-C-5015/26482 Connector Gaskets
Shell Size Dimentions (mm) Part Number Suffix A B C D Part Number 9 24.10 16.50 18.26 3.5 09 EE10-75-38999-09 11 26.50 19.60 20.62 3.5 11 EE10-75-38999-11 13 28.90 22.80 23.01 3.5 13 EE10-75-38999-13 15 31.30 26.00 24.61 3.5 15 EE10-75-38999-15 17 33.70 30.90 26.97 3.5 19 EE10-75-38999-17 19 36.90 32.30 29.36 3.5 19 EE10-75-38999-19 21 40.10 35.20 21.35 3.5 21 EE10-75-38999-21 23 43.30 38.70 34.93 4.1 23 EE10-75-38999-23 25 46.40 42.00 38.10 4.1 25 EE10-75-38999-25